OSGBPB

From BeebWiki
Revision as of 23:28, 22 February 2021 by Jgharston (talk | contribs) (Added template.)
Jump to: navigation, search
OSGBPB: Read or write multiple bytes of data

Specification

6502 Z80 6809 PDP11 80x86 32016 ARM On entry: On exit:
A A A R0 AL R1 R0 = function code = &00 if supported, preserved if not supported, but see notes
YX HL X R1 BX =>control block undefined, control block updated
Control block
&00 R2 R1 Handle Cycle Number
&01 R3 R2 Data Address Updated Data Address
&05 R4 R3 Count Updated Count
&09 R5 R4 Offset Updated Offset
&0D Cy=EOF but see notes

Function summary 
Core functions Extensions
&01 Write bytes using pointer &09 Read names from specified directory
&02 Write bytes to current pointer &0A Read names and information
&03 Read bytes using pointer &0B Read names and extended information
&04 Read bytes from current pointer &0C Read names and filetype information
&05 Read title and boot option
&06 Read directory name
&07 Read library name
&08 Read objects names from current dir.

Functions

&01 Write bytes to open file using new pointer.
&02 Write bytes to open file ignoring new pointer.
&03 Read bytes from open file using new pointer.
&04 Read bytes from open file ignoring new pointer.
With functions &01 and &03 the PTR is first set to the supplied value before transferring data.
On exit,
the number of bytes actually transferred is subtracted from the 'number of bytes' field and returned in the 'number of bytes' field
the number of bytes actually transfered is added to the 'data address' field and the PTR
the new PTR is returned in the 'PTR' field
the carry flag is returned set if the 'number of bytes' field is not zero on exit -- meaning a read was attempted past EOF. If the read or write extended past end-of-file the EOF error-flag is set and a further read without changing PTR will cause an EOF error.
If a write extends past EOF the file is extended, however the contents of the new part of the file are undefined unless overwritten.
An error occurs if the object is not a file or does not have the correct access.
If the handle is 0, the action is undefined. Some systems allow multiple bytes to be written to OSWRCH or read from OSRDCH if the handle is 0.
&05 Read title and boot option of CSD disk into data block:
&00         length of title (n)
&01         title in ASCII characters
&01+n     startup option
&02+n     drive number
&03+n
&06 Read currently selected directory name into data block:
&00         length of drive identity (n)
&01         ASCII drive identity (drive number)
&01+n     length of directory name (m)
&02+n     directory name in ASCII characters
&02+n+m ownership: &00 - owner, &FF - public
&03+n+m
&07 Read current library name into data block:
&00         length of drive identity (n)
&01         ASCII drive identity (drive number)
&01+n     length of library name (m)
&02+n     library name in ASCII characters
&02+n+m ownership: &00 - owner, &FF - public
&03+n+m
&08 Read object names from current directory into data block:
&00         length of filename 1 (n)
&01         filename 1 in ASCII characters
&01+n     length of filename 2 (m)
&02+n     filename 2 in ASCII characters
&02+n+m etc...
The first call to function &08 should be made with the transfer pointer set to zero. This will read the first filename, and the pointer will be updated so that the next call will read the next filename. The cycle number of the current directory is also returned in XY+0. When no filenames are left, the call returns with the 'number of filenames' greater than zero and the carry flag set. See Scanning Directories (Reading Directory Entries).
&09 Reads object names from directory, work/login filename, command line tail:

Reading object names:

&00         object name, null terminated
xxx         next record

Reading work/login filename or command line tail:

&00         length of drive identity or command line tail (n)
&01         ASCII drive identity (drive number) or comand line tail
&01+n     length of work/login filename (m)
&02+n     work/login filename
&02+n+m
If the handle is a channel number of an open directory, reads a null-terminated list of directory entries. The function is called as for OSGBPB 8, but the updated number of objects is the number of filenames read. See also implementation notes
&0A   Read object names and information from the opened directory whose channel number is passed in the handle. If the channel is zero the current directory is scanned. This function is called as for OSGBPB 9. Each record is a whole multiple of four bytes long:
&00 Load address
&04 Execution address
&08 Length
&0C Attributes
&10 Object type (1=file, 2=directory, 3=image file, 4=unresolved symbolic link)
&14 Object name, null terminated, padded to four bytes
xxx next record
&0B Read object names and extended information from the opened directory whose channel number is passed in the handle. If the channel is zero the current directory is scanned. This function is called as for OSGBPB 9. Each record is a whole multiple of four bytes long:
&00 Load address
&04 Execution address
&08 Length
&0C Attributes
&10 Object type (1=file, 2=directory, 3=image file, 4=unresolved symbolic link)
&14 System Internal Name (Sector start address)
&18 Five zeros or centisecond time since 1900
&1D Object name, null terminated, padded to four bytes
xxx next record
&0C Read object names and filetype information from the opened directory whose channel number is passed in the handle. If the channel is zero the current directory is scanned. This function is called as for OSGBPB 9. Each record is a whole multiple of four bytes long:
&00 Load address
&04 Execution address
&08 Length
&0C Attributes
&10 Object type (1=file, 2=directory, 3=image file, 4=unresolved symbolic link)
&14 Object file type (b8-b19 of load address)
&18 Object name, null terminated, padded to four bytes
xxx next record

Notes

Some filing systems preserve A even if they support the function.

Many filing systems do not return Carry consistently. The only consistent way of telling if the end of file has been reached is to test whether the updated number of bytes/objects is unequal to zero.

Calling from BBC BASIC

BBC BASIC makes no calls to OSGBPB.

Entry points

  • BBC BASIC Entry Address: &FFD1
  • 6502 Entry Address: &FFD1, vectors via &021A
  • Z80 Entry Address: &FFD1, vectors via &FFD2
  • 6809 Entry Address: &FFD1, vectors via &FFD2
  • 80x86 Entry Address: INT &41, vectors via 0000:0104
  • 32000 Entry Address: SVC &0F
  • PDP-11 Entry Address: EMT 11, vector &0B
  • ARM Entry Address: SWI &0C "OS_GBPB", vector &0C

Implementations

CFS

Not implemented, simply returns with an RTS instruction.

The Master 128 implements &02 and &04.

ROMFS

Not implemented, simply returns with an RTS instruction.

The Master 128 implements &04.

DFS

Acorn DFS and contemporary filing systems implement functions &01 to &08 inclusive. Watford DFS implements &09 to read the work name.

In Opus EDOS and Slogger Challenger, OSGBPB 5 does not return the CSD drive number. In Opus DDOS the drive number byte includes a representation of the volume letter in bits 6..4.

In Opus/Slogger filing systems the drive identity returned by OSGBPB 6 and 7 consists of one or two characters, the first being the ASCII drive digit 0..3 and the second being the optional volume letter A..H.

ADFS

ADFS implements &01 to &08

HADFS

HADFS implements &01 to &0B.

Z80Tube

The Z80Tube Z80 emulator implements OSGBPB 9,0 to read the command line tail.

65Tube

The emulator traps implemented in 65Tube allows calls to OSGBPB with A>9 to pass additional parameters:

On entry:   On exit:  
  XY?0 = ignored   XY?0 = directory cycle
  XY!1 = address   XY!1 = updated address
  XY!5 = count   XY!5 = returned count
  XY!9 = offset   XY!9 = updated offset
  XY!13 =>directory name   XY!13 = preserved
  XY!17 =>wildcard to match   XY!17 = preserved

6502Em

The emulator traps implemented in Warm Silence's 6502Em implement OSGBPB 9 to read object names from the current directory, but use the control block contents differently from the standard:

On entry:   On exit:  
  XY?0 = count   XY?0 = returned count
  XY!1 = address   XY!1 = preserved
  XY!5 = buffer length   XY!5 = preserved
  XY!9 = offset   XY!9 = updated offset
Filing System Calls
  • OSFILE : File and directory operations
  • OSARGS : Information on open objects
  • OSBGET : Read (get) a byte
  • OSBPUT : Write (put) a byte
  • OSGBPB : Read or write multiple bytes of data
  • OSFIND : Open or close an object
  • FSCV : Filing system control

Jgharston 17:01, 6 November 2009 (UTC) Jgharston (talk) 15:56, 30 September 2016 (UTC)

Jgharston (talk) 00:03, 3 October 2016 (UTC)