OSWORD &10

OSWORD &10 (16): Network transmit

On entry:
 XY?0   =control byte with b7 set
 XY?1   =destination port
 XY+2..3=destination station
 XY!4   =buffer start address
 XY!8   =buffer end address
 XY!12  =remote address for immediate operations
On exit
 XY?0=zero if transmission failed to start

Transmission must be polled with OSBYTE &32 (50). If the destination station
is &FFFF, a broadcast will be sent, the eight bytes of data are in the control
block at XY+4 to XY+11. If the port number is zero, an immediate operation is
transmitted.

See Also

• Econet packet
• Immediate operations
• http://mdfs.net/Docs/Comp/BBC/Oswords

Networking calls
OSWORD &10 : Network transmit OSWORD &11 : Network receive OSWORD &12 : Read remote argument block OSWORD &13 : Read and Write local station information OSWORD &14 : Communicate with fileserver, etc.	OSBYTE &32 : Poll network transmit OSBYTE &33 : Poll network receive OSBYTE &34 : Delete receive control block OSBYTE &35 : Terminate remote connection

Jgharston 13:23, 26 May 2009 (UTC)