OSWORD

Miscellaneous actions with a control block

Specification

6502	Z80	6809	PDP11	80x86	32016	ARM	On entry:	On exit:
A	A	A	R0	AL	R1	R0	= function code	undefined
XY	HL	X	R1	BX	R2	R1	=>control block	undefined, control block updated
Control block for calls>&7F
&00	Length of sent control block
&01	Length of received control block
&02...	Any other parameters

OSWORD &00 is the only call that is allowed to return data in registers. All other calls return data in the control block.

OSWORD calls with numbers &15-&7F must only have a maximum of 16 bytes in the control block. OSWORD calls with numbers greater than &7F must contain the number of parameters to send in the first byte of the parameter block, and the number of parameters to receive in the second byte of the parameter block, inclusive of the first two bytes. There are some calls that break this and will not work in all cases.

OSWORD calls with numbers &E0 to &FF are "available for use by the user" and are passed directly to USERV on the 6502 I/O processor.

Calling from BBC BASIC

• INPUT calls OSWORD &00
• =TIME calls OSWORD &01
• TIME= calls OSWORD &02
• SOUND calls OSWORD &07
• ENVELOPE calls OSWORD &08
• =POINT calls OSWORD &09
• =TIME$ calls OSWORD &0E
• TIME$= calls OSWORD &0F

Entry points

• BBC BASIC Entry Address: &FFF1
• 6502 Entry Address: &FFF1, vectors via &020C
• Z80 Entry Address: &FFF1, vectors via &FFF2
• 6809 Entry Address: &FFF1, vectors via &FFF2
• 80x86 Entry Address: INT &4A, vectors via &0000:0128
• 32000 Entry Address: SVC &07
• PDP-11 Entry Address: EMT 3, vector &03
• ARM Entry Address: SWI &07 "OS_Word", vector &07

See Also

• OSWORD Index
• http://mdfs.net/Docs/Comp/BBC/Oswords
• http://mdfs.net/Docs/Comp/BBC/Osword

References

Jgharston 17:03, 6 November 2009 (UTC)