Difference between revisions of "OSBYTE &93"
(citation) |
(address oops) |
||
| Line 6: | Line 6: | ||
;Warning | ;Warning | ||
| − | Acorn MOS 1.20 writes the byte using STA & | + | Acorn MOS 1.20 writes the byte using STA &FC00,X. As it is an indexed-addressing instruction, the 6502 CPU always<ref name="64doc">Jarkko Sonninen ''et al.'' (1994), [http://rk.nvg.ntnu.no/bbc/doc/6502.txt 64doc]</ref> performs a dummy read immediately before the write. Some hardware, though not all, may operate inappropriately due to the dummy read: outputs could momentarily be set to the wrong level, or an interrupt condition could be cleared and lost. Review the datasheet for the hardware being accessed to see whether it will be adversely affected. |
A safer alternative is to call [[OSWORD &06]] with !XY=&FFFFFC00 + offset, XY?4=byte. | A safer alternative is to call [[OSWORD &06]] with !XY=&FFFFFC00 + offset, XY?4=byte. | ||
Revision as of 22:53, 11 June 2016
OSBYTE &93 (147) - Write FRED
X=offset within page &FC and Y=byte to write
- Warning
Acorn MOS 1.20 writes the byte using STA &FC00,X. As it is an indexed-addressing instruction, the 6502 CPU always[1] performs a dummy read immediately before the write. Some hardware, though not all, may operate inappropriately due to the dummy read: outputs could momentarily be set to the wrong level, or an interrupt condition could be cleared and lost. Review the datasheet for the hardware being accessed to see whether it will be adversely affected.
A safer alternative is to call OSWORD &06 with !XY=&FFFFFC00 + offset, XY?4=byte.
See Also
Jgharston 22:04, 26 May 2009 (UTC)
