Difference between revisions of "OSBYTE &A3"
m (Added link.) |
(→X=&F2 (242) Graphics Extension Support (GSX, RISC OS)) |
||
| Line 33: | Line 33: | ||
Y=65 return status returns | Y=65 return status returns | ||
On exit: | On exit: | ||
| + | if X=Y=0 then the ROM is fitted but disabled | ||
X=b0..5 current dot dash pattern repeat length (0 means 64) | X=b0..5 current dot dash pattern repeat length (0 means 64) | ||
| − | b6 if set flood fill is | + | b6 if set flood fill is turned on |
b7 if set GXR ROM is turned on | b7 if set GXR ROM is turned on | ||
Y=number of pages allocated to sprites | Y=number of pages allocated to sprites | ||
On entry: | On entry: | ||
| − | Y=66 return info on | + | Y=66 return info on currently selected sprite |
On exit: | On exit: | ||
| + | if X=Y=0 then the ROM is fitted but disabled, or no sprite is selected | ||
X=pixel width | X=pixel width | ||
Y=pixel height | Y=pixel height | ||
| − | + | ||
| + | If the GXR ROM is absent, the call returns X=&FF and Y preserved. A call to OSBYTE &A3,242,65 | ||
| + | can determine if GSX is absent, present but disabled, or present and enabled: | ||
| + | |||
| + | On entry: A=&A3, X=242, Y=65 | ||
| + | On exit: Y=65 - GSX ROM absent (Y preserved if ROM is absent) | ||
| + | Y<64 - GSX ROM is present (not possible to have more | ||
| + | than 64 pages of workspace) | ||
| + | X.b7=0 - GSX ROM disabled | ||
| + | X.b7=1 - GSX ROM enabled | ||
===X=&F3 (243) 65Tube emulator=== | ===X=&F3 (243) 65Tube emulator=== | ||
Revision as of 12:57, 21 January 2021
Contents
OSBYTE &A3 (163) - Application support
On entry:
X = application identifier
X=128 Electron Plus 1
X=242 Graphics Extension Support
X=243 65Tube
X=253 Cause a reset
X=255 Acornsoft View family
Y = parameter
On exit:
X = return value
Y = return value
X=&80 (128) Plus 1 Support
On entry:
Y=0 enable printer/ADC
Y=1 disable printer/ADC
Y=2 enable serial port
Y=3 disable serial port
Y=4 restore ROM table
On exit:
If Y<4 on entry,
X=0 if enabled, X<>0 if disabled
If Y=4 on entry,
X=default language in X, b7 set if no default language
X=&F2 (242) Graphics Extension Support (GSX, RISC OS)
On entry:
Y=0 resets the dot-dash pattern and length to defaults
Y=1..64 set dot dash pattern repeat length
On entry:
Y=65 return status returns
On exit:
if X=Y=0 then the ROM is fitted but disabled
X=b0..5 current dot dash pattern repeat length (0 means 64)
b6 if set flood fill is turned on
b7 if set GXR ROM is turned on
Y=number of pages allocated to sprites
On entry:
Y=66 return info on currently selected sprite
On exit:
if X=Y=0 then the ROM is fitted but disabled, or no sprite is selected
X=pixel width
Y=pixel height
If the GXR ROM is absent, the call returns X=&FF and Y preserved. A call to OSBYTE &A3,242,65 can determine if GSX is absent, present but disabled, or present and enabled:
On entry: A=&A3, X=242, Y=65
On exit: Y=65 - GSX ROM absent (Y preserved if ROM is absent)
Y<64 - GSX ROM is present (not possible to have more
than 64 pages of workspace)
X.b7=0 - GSX ROM disabled
X.b7=1 - GSX ROM enabled
X=&F3 (243) 65Tube emulator
On entry: Y=4 find code address On exit: if Y<>0, XY=address to jump to Called on Tube reset, *BASIC and NMIs to ask for any code entry address. On entry: Y=6 find *command to execute On exit: if Y<>0, XY=>*command to execute Called on Tube reset to ask for any startup command.
X=&FD (253) Cause a Reset
On entry: Y=OSBYTE &FD reset type: 0 = Soft Reset (Break) 1 = Power-On Reset 2 = Hard Reset (Ctrl-Break) On exit: Will only exit if the call is not implemented. Implemented by RSTROM and other ROMs. See also Reset from software.
X=&FF (255) Acornsoft View family workspace flag
On entry: Y<&80 read ROM's workspace byte at &DF0+romnum Y>&7F set ROM's workspace byte at &DF0+romnum to &80 Y=&01/&81 read/set View's ROM workspace byte Y=&02/&82 read/set ViewSheet's ROM workspace byte Y=&03/&83 read/set ViewStore's ROM workspace byte Y=&04/&84 read/set ViewSpell's ROM workspace byte On exit: X=ROM's workspace byte at &DF0+romnum Some versions of ViewSheet and ViewSpell do not implement the call to set the workspace byte.
See Also
Jgharston 22:16, 26 May 2009 (UTC) Jgharston (talk) 02:26, 24 November 2020 (CET)
