Difference between revisions of "OSBYTE &D7"
(→Appearances in MOS 1.20: *FX 215,0 applies when?) |
m (→Effect: promote heading) |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 24: | Line 24: | ||
In OS 1.20 this variable resides at &0267 and is initialised to &81 on soft | In OS 1.20 this variable resides at &0267 and is initialised to &81 on soft | ||
break, CTRL BREAK and power up. It is then interrogated later in the | break, CTRL BREAK and power up. It is then interrogated later in the | ||
| − | startup routine. The clients which may alter | + | startup routine. The clients which may alter the variable in time for its |
use are, in chronological order: | use are, in chronological order: | ||
* Test hardware on the 1 MHz bus, which raises an interrupt and presents an entry vector at &FDFE | * Test hardware on the 1 MHz bus, which raises an interrupt and presents an entry vector at &FDFE | ||
* Code at the break intercept vector, set up by OSBYTE calls [[OSBYTE &F7|&F7]], [[OSBYTE &F8|&F8]] and [[OSBYTE &F9|&F9]] | * Code at the break intercept vector, set up by OSBYTE calls [[OSBYTE &F7|&F7]], [[OSBYTE &F8|&F8]] and [[OSBYTE &F9|&F9]] | ||
| − | * Paged ROMs during [[service calls]] &FF, &01, &02, &FE and &03 | + | * Paged ROMs during [[service calls]] &FF, &01, &02, &FE and &03. Claiming service call &FE automatically disables the startup message. |
A filing system ROM has the ability, during service call &03, to inhibit | A filing system ROM has the ability, during service call &03, to inhibit | ||
| − | hangup on boot error for both itself and RFS though this is | + | hangup on boot error for both itself and RFS though this is not recommended. |
| + | |||
| + | Bit 7 of the X register controls whether the startup message – <tt>BBC | ||
| + | Computer</tt> plus optional memory display – appears on screen after a | ||
| + | reset. The message is suppressed if bit 7 is clear and shown if it is set. | ||
| + | Bit 7 is set by default. Third party hardware may clear the bit in order to | ||
| + | print its own startup message instead, for instance. | ||
| + | |||
| + | Bit 0 of the X register controls the computer's response to errors raised | ||
| + | with <tt>BRK</tt> instructions, before a language ROM installs its own | ||
| + | error handler. Firstly the message attached to the error is displayed; next, the MOS behaves as follows: | ||
| + | * If bit 0 is clear: an error raised while fetching the <tt>!BOOT</tt> executable from the ROM Filing System, or while <tt>!BOOT</tt> is running, causes the MOS to become unresponsive until BREAK is pressed. Any other early error causes the MOS to select the Cassette Filing System at 1200 baud, and either re-enter the previous language or enter the highest-priority language installed. | ||
| + | * If bit 0 is set: an error raised while loading or running <tt>!BOOT</tt> from ROM leads to CFS selection and language entry; any other early error results in a hangup. Bit 0 is set by default. | ||
| + | |||
| + | The 'other' early errors encompass all errors raised by paged ROMs during | ||
| + | startup service calls, including call &03 which installs a filing system and | ||
| + | optionally runs a boot command from disc or other media; and the | ||
| + | <tt>Language?</tt> error raised when the MOS finds no paged ROM that | ||
| + | provides a system language. Clearing bit 0 in the latter case results in | ||
| + | <tt>Language?</tt> recurring endlessly. | ||
| + | |||
| + | Booting from ROM only occurs if booting is requested, by the setting of | ||
| + | keyboard link 5 or pressing SHIFT BREAK, ''and'' no paged ROM claims the | ||
| + | filing system initialisation service call &03. | ||
| + | |||
| + | Clearing both bits is a special case: after successfully running | ||
| + | <tt>!BOOT</tt> from ROM, the MOS selects the Cassette Filing System | ||
| + | regardless of any filing system installed by <tt>!BOOT</tt>. To inhibit | ||
| + | this behaviour set X to another value, such as 2 – this adjustment is | ||
| + | unofficial. | ||
| + | |||
| + | The Y register determines which, if any, of the previous settings shall be | ||
| + | preserved. Setting bit 7 keeps the startup message display setting; setting | ||
| + | bit 0 keeps the error response setting. Each bit set in Y should be cleared | ||
| + | in X. | ||
| + | |||
| + | The call resturns the previous <code>*FX 215</code> setting in X, and the | ||
| + | value of the next location in Y. | ||
===Appearances in MOS 1.20=== | ===Appearances in MOS 1.20=== | ||
| Line 72: | Line 109: | ||
so that, if it had been clear, it is set while executing the command and hangs | so that, if it had been clear, it is set while executing the command and hangs | ||
the machine in the event of reaching a <tt>BRK</tt> instruction. Bit 0 is set | the machine in the event of reaching a <tt>BRK</tt> instruction. Bit 0 is set | ||
| − | by default and | + | by default and so the MOS does ''not'' hang on a ROM boot error. |
The MOS does not look at bit 7 during OSCLI, but the boot command will see a | The MOS does not look at bit 7 during OSCLI, but the boot command will see a | ||
value one less than the proper value (modulo 256) while it is running. | value one less than the proper value (modulo 256) while it is running. | ||
| − | On successful completion of the < | + | On successful completion of the <code>*/!BOOT</code> command, the |
| − | instruction sets the Z flag according to the restored value at &0267. If | + | <tt>INC</tt> instruction sets the Z flag according to the restored value at |
| − | the value is not zero then the following <tt>BNE</tt> branches to select a | + | &0267. If the value is not zero then the following <tt>BNE</tt> branches to |
| − | language ROM to enter. Otherwise <code>*FX 215,0</code> is in effect: the | + | select a language ROM to enter. Otherwise <code>*FX 215,0</code> is in |
| − | MOS first selects the Cassette Filing System at 1200 | + | effect: the MOS first selects the Cassette Filing System at 1200 |
| − | baud.<ref name="mos125"> | + | baud.<ref name="mos125">The CPU actually falls through into the early |
| + | <tt>BRK</tt> handler that also handles any error raised during service call | ||
| + | &03 – which may mean that a filing system failed to set up properly, so the | ||
| + | MOS falls back to CFS just in case.</ref> | ||
The MOS source code assembling the instruction at &DBB6 reads: | The MOS source code assembling the instruction at &DBB6 reads: | ||
| Line 106: | Line 146: | ||
language is re-entered or a language is chosen from the available ROMs. | language is re-entered or a language is chosen from the available ROMs. | ||
| − | + | ==Effect== | |
Two important errors affected by OSBYTE &D7 are: | Two important errors affected by OSBYTE &D7 are: | ||
| Line 114: | Line 154: | ||
Both are common errors in the BBC Micro: the former arising from keys being | Both are common errors in the BBC Micro: the former arising from keys being | ||
held down on BREAK and no bootable ROM present, the latter being raised if | held down on BREAK and no bootable ROM present, the latter being raised if | ||
| − | no language ROM is | + | no language ROM is found. |
| − | To improve behaviour in such cases, Acorn opted to | + | To improve behaviour in such cases, Acorn opted to recover from <tt>File not |
found</tt> and allow a language to start up regardless. <tt>Language?</tt> | found</tt> and allow a language to start up regardless. <tt>Language?</tt> | ||
is unrecoverable in MOS 1.20 until a hardware change is made, and like other | is unrecoverable in MOS 1.20 until a hardware change is made, and like other | ||
errors occurring so early the best response is to halt the machine. | errors occurring so early the best response is to halt the machine. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Reuse== | ==Reuse== | ||
Latest revision as of 16:41, 9 November 2021
OSBYTE &D7 (215) - Enable/Disable Startup Message
The Tube system replaces the startup computer message, and this call is
used to do this. It can only be acted on by a paged ROM, since no other
software has had a chance to load, only 2 bits are defined:
b0=0=supress startup message
=1=message as normal
b7=0=computer hangs if there's a !Boot file error in the ROM filing system
=0=computer hangs if there's a !Boot file error in the DISC filing system
Specification
| 6502 | On entry: | On exit: |
| A | =&D7 | preserved |
| X | =0 no startup message, hangup on RFS boot error =1 no startup message, hangup on disc boot error =128 startup message, hangup on RFS boot error =129 startup message, hangup on disc boot error |
previous value |
| Y | =0 change both settings =1 preserve error setting =128 preserve message setting =129 preserve both settings |
contents of next location |
Description
In OS 1.20 this variable resides at &0267 and is initialised to &81 on soft break, CTRL BREAK and power up. It is then interrogated later in the startup routine. The clients which may alter the variable in time for its use are, in chronological order:
- Test hardware on the 1 MHz bus, which raises an interrupt and presents an entry vector at &FDFE
- Code at the break intercept vector, set up by OSBYTE calls &F7, &F8 and &F9
- Paged ROMs during service calls &FF, &01, &02, &FE and &03. Claiming service call &FE automatically disables the startup message.
A filing system ROM has the ability, during service call &03, to inhibit hangup on boot error for both itself and RFS though this is not recommended.
Bit 7 of the X register controls whether the startup message – BBC Computer plus optional memory display – appears on screen after a reset. The message is suppressed if bit 7 is clear and shown if it is set. Bit 7 is set by default. Third party hardware may clear the bit in order to print its own startup message instead, for instance.
Bit 0 of the X register controls the computer's response to errors raised with BRK instructions, before a language ROM installs its own error handler. Firstly the message attached to the error is displayed; next, the MOS behaves as follows:
- If bit 0 is clear: an error raised while fetching the !BOOT executable from the ROM Filing System, or while !BOOT is running, causes the MOS to become unresponsive until BREAK is pressed. Any other early error causes the MOS to select the Cassette Filing System at 1200 baud, and either re-enter the previous language or enter the highest-priority language installed.
- If bit 0 is set: an error raised while loading or running !BOOT from ROM leads to CFS selection and language entry; any other early error results in a hangup. Bit 0 is set by default.
The 'other' early errors encompass all errors raised by paged ROMs during startup service calls, including call &03 which installs a filing system and optionally runs a boot command from disc or other media; and the Language? error raised when the MOS finds no paged ROM that provides a system language. Clearing bit 0 in the latter case results in Language? recurring endlessly.
Booting from ROM only occurs if booting is requested, by the setting of keyboard link 5 or pressing SHIFT BREAK, and no paged ROM claims the filing system initialisation service call &03.
Clearing both bits is a special case: after successfully running !BOOT from ROM, the MOS selects the Cassette Filing System regardless of any filing system installed by !BOOT. To inhibit this behaviour set X to another value, such as 2 – this adjustment is unofficial.
The Y register determines which, if any, of the previous settings shall be preserved. Setting bit 7 keeps the startup message display setting; setting bit 0 keeps the error response setting. Each bit set in Y should be cleared in X.
The call resturns the previous *FX 215 setting in X, and the
value of the next location in Y.
Appearances in MOS 1.20
The OSBYTE &D7 variable is mentioned in the following places in the MOS 1.20 code (taken from Geoff Cox's disassembly):
... DB5F LDX #&FE ;issue call for Tube to explode character set etc. DB61 LDY &027A ;Y=FF if tube present else Y=0 DB64 JSR &F168 ;and make call via F168 DB67 AND &0267 ;if A=&FE and bit 7 of 0267 is set then continue DB6A BPL &DB87 ;else ignore start up message DB6C LDY #&02 ;output to screen DB6E JSR &DEA9 ;'BBC Computer ' message ...
JSR &F168 returns A=X=0 if the service call is claimed, A=X=&FF if
unclaimed. Either setting *FX 215,n with n
< 128 or claiming call &FE ensures that the startup message is not printed.
... DBA9 LDX #&D2 ; DBAB LDY #&EA ; DBAD DEC &0267 ;decrement ignore start up message flag DBB0 JSR OSCLI ;and execute */!BOOT DBB3 INC &0267 ;restore start up message flag DBB6 BNE &DBBE ;if not zero then DBBE DBB8 LDA #&00 ;else A=0 DBBA TAX ;X=0 DBBB JSR &F137 ;set tape speed ...
A short time later in the startup sequence; here, service call &03 has not been claimed and booting is requested, so the MOS has selected the ROM Filing System and is attempting to execute a boot file from ROM. The paired DEC and INC instructions invert bit 0 during the OSCLI call so that, if it had been clear, it is set while executing the command and hangs the machine in the event of reaching a BRK instruction. Bit 0 is set by default and so the MOS does not hang on a ROM boot error.
The MOS does not look at bit 7 during OSCLI, but the boot command will see a value one less than the proper value (modulo 256) while it is running.
On successful completion of the */!BOOT command, the
INC instruction sets the Z flag according to the restored value at
&0267. If the value is not zero then the following BNE branches to
select a language ROM to enter. Otherwise *FX 215,0 is in
effect: the MOS first selects the Cassette Filing System at 1200
baud.[1]
The MOS source code assembling the instruction at &DBB6 reads:
BNE DNRFS ;[ALWAYS jump, do not reset filing system]
and so Acorn expected the equivalent of *FX 215,0 not to occur
during startup. *FX 215,2 is an unofficial setting that
preserves the filing system selection after booting from ROM.
... DC54 LDY #&00 ;Y=0 to point to byte after BRK DC56 JSR &DEB1 ;print message DC59 LDA &0267 ;if BIT 0 set and DISC EXEC error DC5C ROR ;occurs DC5D BCS &DC5D ;hang up machine!!!! ...
Lastly here is the start of the default BRK handler referenced by BRKV until a language replaces it with its own. Bit 0 decides whether to halt or continue: if it is set, the CPU loops forever; if clear, the current language is re-entered or a language is chosen from the available ROMs.
Effect
Two important errors affected by OSBYTE &D7 are:
- File not found while searching for !BOOT in the RFS
- Language? while searching for a language ROM.
Both are common errors in the BBC Micro: the former arising from keys being held down on BREAK and no bootable ROM present, the latter being raised if no language ROM is found.
To improve behaviour in such cases, Acorn opted to recover from File not found and allow a language to start up regardless. Language? is unrecoverable in MOS 1.20 until a hardware change is made, and like other errors occurring so early the best response is to halt the machine.
Reuse
Once startup is complete and a language installs its own BRK handler, all eight bits of this variable can be reused for temporary storage. If the default BRK handler may still be invoked, bits 7..1 remain free. The contents are destroyed on any type of reset and so accommodation for DEC &0267 or INC &0267 need not be made.
See Also
Jgharston 22:56, 26 May 2009 (UTC)- ↑ The CPU actually falls through into the early BRK handler that also handles any error raised during service call &03 – which may mean that a filing system failed to set up properly, so the MOS falls back to CFS just in case.
