OSWORD &18

From BeebWiki
Revision as of 02:31, 19 December 2010 by Jgharston (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

OSWORD &18 (24) - IP Network transmit

This call is made by a modifed NFS to pass networking calls on to an IP networking handler. It should not be called directly by the user, programs should call OSWORD &10 and allow the networking system to forward the call to the appropriate handler.

Specification

   On entry:
       XY?0   = control byte with b7 set
       XY?1   = destination port
       XY+2..3= destination station
       XY!4   = buffer start address
       XY!8   = buffer end address
       XY!12  = remote address for immediate operations
   On exit
       XY?0   = zero if transmission failed to start

Transmission must be polled with OSBYTE &32 (50). If the destination station is &FFFF, a broadcast will be sent, the eight bytes of data are in the control block at XY+4 to XY+11. If the port number is zero, an immediate operation is transmitted.

See Also

Networking calls

Jgharston 01:31, 19 December 2010 (UTC)