Difference between revisions of "OSWORD &10"

From BeebWiki
Jump to: navigation, search
m (Added link to immediate operations.)
Line 1: Line 1:
 
[[Category:OSWORD]][[Category:Networking]]
 
[[Category:OSWORD]][[Category:Networking]]
OSWORD &10 (16 ) - Network transmit
+
{{PageTitle|OSWORD &10 (16) - Network transmit}}
 
 
 
  On entry:
 
  On entry:
 
   XY?0  =control byte with b7 set
 
   XY?0  =control byte with b7 set

Revision as of 20:57, 29 December 2020

OSWORD &10 (16) - Network transmit
On entry:
 XY?0   =control byte with b7 set
 XY?1   =destination port
 XY+2..3=destination station
 XY!4   =buffer start address
 XY!8   =buffer end address
 XY!12  =remote address for immediate operations
On exit
 XY?0=zero if transmission failed to start

Transmission must be polled with OSBYTE &32 (50). If the
destination station is &FFFF, a broadcast will be sent, the eight
bytes of data are in the control block at XY+4 to XY+11. If the
port number is zero, an immediate operation is transmitted.

See Also

Networking calls

Jgharston 13:23, 26 May 2009 (UTC)